Astaxanthin belongs to the carotenoids and is especially known for its intense red colour. In nature, it is produced, among others, by the microalga Haematococcus pluvialis. Particularly interesting: the alga does not continuously produce astaxanthin in large amounts, but primarily when it is exposed to special environmental conditions.
For BioProphyl Astaxanthin, the raw material is cultivated in open basins, known as raceways, under natural sunlight in the Chilean Atacama region. This region offers ideal natural conditions: plenty of sunlight, a dry environment and culture conditions that are easy to control. This creates the basis for a high-quality, natural astaxanthin extract from microalgae.
Astaxanthin production briefly explained
Production begins with the growth of green microalgae. Afterwards, targeted stress factors such as intense sunlight and a changed nutrient supply stimulate the natural formation of astaxanthin. The algae turn red, are harvested, dried and finally gently extracted. The result is a concentrated astaxanthin extract, which is further processed into BioProphyl Astaxanthin capsules.
1. Cultivation: The origin lies in the microalga
The basis for natural astaxanthin is the microalga Haematococcus pluvialis. In the first phase, its growth is the main focus. The algae are cultivated in open water basins, which are also referred to as raceways due to their elongated shape and controlled water movement.
In this growth phase, the microalgae primarily need light, suitable temperatures, water and nutrients. Under favourable conditions, they multiply and initially form a green biomass. This green colour is caused by chlorophyll, which the algae use for photosynthesis.
2. Growth: Light, temperature and nutrients in balance
For the microalgae to develop well, the conditions need to be as stable as possible. Light provides the energy for photosynthesis, temperature influences the metabolism of the algae, and the nutrient supply supports the growth of the biomass.
This phase is, in a sense, the build-up phase. The algae should multiply and form sufficient cell mass. Only once enough biomass is present does the next decisive step follow: the targeted adjustment of the culture conditions.
3. Stress phase: Why the alga turns red
Natural astaxanthin formation is particularly stimulated when the alga enters a stress phase. This can include intense sunlight, changes in the nutrient supply or other environmental stimuli.
What may initially sound negative is crucial for astaxanthin production. The alga responds to these special conditions by increasingly storing carotenoids. This changes its colour: the green microalga gradually becomes a reddish algal biomass.
Nutrient reduction plays an important role in this process. When certain nutrients are reduced, the alga slows down its growth and switches more strongly into a protective and storage state. In this state, astaxanthin can accumulate in the cells. It is precisely this natural reaction that makes Haematococcus pluvialis so interesting as a source of astaxanthin.
Why the Atacama region in particular?
The Atacama region in Chile is known for its exceptionally high solar radiation and its dry climate. For the cultivation of microalgae, this can be an advantage, because sunlight is a natural factor in the growth and stress process. Instead of relying on artificial lighting, the alga can be cultivated there under natural light conditions.
For BioProphyl, one thing is particularly important: the raw material comes from controlled algae cultivation and not from synthetic production. This keeps the origin of the astaxanthin clearly traceable – from the microalga to the finished extract.
4. Astaxanthin formation: The red colour as a visible sign
During the stress phase, the alga stores astaxanthin in its cells. This accumulation is visually reflected in the intense red colouration of the algal biomass. The more strongly the alga produces astaxanthin, the more clearly its colour changes.
This colour change is one of the most fascinating steps in the production process. It makes visible what is happening inside the microalga: the green growth phase transitions into a red maturation phase. For the subsequent production of the extract, this exact point in time is crucial.
5. Harvest: Gentle separation of the red algal biomass
Once the algae have produced sufficient astaxanthin, the red biomass is harvested. It is separated from the culture water and prepared for further processing. The aim is to preserve the valuable components as gently as possible.
This step sounds simple, but it is technologically demanding. The algal biomass must be processed cleanly, efficiently and under controlled conditions so that cultivation can result in a high-quality raw material.
6. Drying: Preparation for extraction
After harvesting, the algal biomass is dried. This removes water and prepares the biomass for the subsequent extraction. Here, too, the focus is on processing the biomass as gently as possible.
Careful drying is important because astaxanthin can be sensitive to light, oxygen and heat. That is why controlled conditions matter, supporting the quality and stability of the raw material.
7. Extraction: The alga becomes astaxanthin oleoresin
In the next step, the astaxanthin is obtained from the dried algal biomass. A gentle CO₂ extraction process is used for this. In this method, carbon dioxide is used under controlled conditions to dissolve fat-soluble components from the alga.
The result is an astaxanthin-rich oleoresin. This is an oily extract that contains the natural carotenoid profile of the alga. Since astaxanthin is fat-soluble, an oily matrix is particularly well suited for further processing.
One advantage of CO₂ extraction: it does not require conventional organic solvents. This fits with a quality standard focused on purity, naturalness and controlled processing.
8. Finished product: Natural astaxanthin in plant-based capsules
After extraction, the astaxanthin extract is further processed. BioProphyl Astaxanthin contains 8 mg natural astaxanthin per capsule as an extract from Haematococcus pluvialis. Vitamin E is also included. Vitamin E contributes to the protection of cells from oxidative stress.
Since astaxanthin is fat-soluble, it is processed in an oily matrix. BioProphyl uses MCT oil from coconut as a plant-based carrier oil for this. The capsules are plant-based and therefore also suitable for a vegetarian or vegan diet.
BioProphyl Astaxanthin
Natural astaxanthin from the microalga Haematococcus pluvialis, cultivated under natural sunlight in the Chilean Atacama region.
Go to the Astaxanthin productNatural astaxanthin vs. synthetic astaxanthin
Astaxanthin can come from different sources. Natural astaxanthin is obtained from microalgae such as Haematococcus pluvialis. In addition, there is also synthetically produced astaxanthin, which is manufactured industrially.
For food supplements of natural origin, the algal source is particularly interesting because it provides astaxanthin in a natural context: embedded in the carotenoid profile of the microalga and often in the form of fatty acid esters. This is exactly why BioProphyl relies on natural astaxanthin from microalgae.
Frequently asked questions about the production of astaxanthin
How is astaxanthin produced?
From the microalga Haematococcus pluvialis to the natural astaxanthin extract: the production of astaxanthin from microalgae explained step by step.
Which alga is natural astaxanthin obtained from?
Natural astaxanthin is often obtained from the microalga Haematococcus pluvialis. Under certain environmental conditions, this alga can produce larger amounts of astaxanthin and turn an intense red colour in the process.
Why are the algae stressed during production?
The stress phase stimulates natural astaxanthin formation. Through factors such as intense sunlight or a changed nutrient supply, the alga reduces its growth and increasingly stores red carotenoids.
What does nutrient reduction mean for astaxanthin?
With nutrient reduction, certain nutrients in the algal culture are specifically changed or reduced. This causes the alga to switch from the pure growth phase into a stress or maturation phase, in which it can accumulate astaxanthin.
Why is astaxanthin processed in oil?
Astaxanthin is fat-soluble. That is why an oily matrix is particularly well suited to process the extract evenly. BioProphyl uses MCT oil from coconut for this.
What is the advantage of CO₂ extraction?
CO₂ extraction is a controlled and gentle process for obtaining fat-soluble plant compounds. It does not require conventional organic solvents and is therefore well suited for high-quality plant and algae extracts.
Conclusion: Astaxanthin is created through nature, time and precision
The production of astaxanthin is a fascinating process: through light, controlled culture conditions and a targeted stress phase, green microalgae become an intensely red algal biomass. After harvesting, drying and CO₂ extraction, this results in a natural astaxanthin extract.
BioProphyl relies on natural astaxanthin from Haematococcus pluvialis, cultivated in open raceways under natural sunlight in the Chilean Atacama region. This combines a natural origin with modern, controlled processing.
Find astaxanthin and other products from the BioProphyl range in the Body functions & needs collection.



